Dell POWEREDGE M905 User Manual
Page 27
Configuration Guide
25
3 Configure the CMC network settings:
–
To set a static IP address, type
setniccfg -s
and press
Use the appropriate settings for your network.
–
To configure the CMC to obtain an IP address using DHCP, type
setniccfg -d
and press
4 To activate the new network settings, type
racadm racreset
and press
Logging in to the CMC Using the Web-Based Interface
1 Open a supported Web browser window.
For more information, see "Supported Web Browsers" in the CMC User’s
Guide.
2 Login to the CMC.
–
If the CMC is accessed using a specific IP address, type the following
URL In the Address field, and then press
https://<
CMC IP address>
The default IP address for the CMC is 192.168.0.120. If the default
HTTPS port number (port 443) has been changed, type:
https://<
CMC IP address>:
where
number is the HTTPS port number.
–
If you access the CMC using a registered DNS name, type the CMC’s
name:
https://<
CMC name>
By default, the CMC name on the DNS server is cmc-
.
R433Cbk0.book Page 25 Wednesday, July 30, 2008 6:05 PM