Dell PowerVault DR2000v - Manual (Page 5)

5 Setting Up Dell™ DR Series Disk Backup Appliance as Backup to Disk Target on Symantec NetBackup™ | January 2014
1 Install and Configure the DR Series Deduplication
Appliance
1. Rack and cable the DR Series Deduplication Appliance, and power it on.
2. Please refer to
Dell DR Series System Administrator Guide , under sections of “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using RACADM”
for using iDRAC connection and initializing the appliance.
3. Log in to iDRAC using the default address 192.168.0.120, or the IP that is assigned to the iDRAC
interface. Use user name and password of “root/calvin”.
4. Launch the virtual console.