Picture (in pc mode) – Dell 4310WX Projector User Manual
Page 35

Using Your Projector
35
HDMI—Use
and
to enable or disable HDMI input.
D
ISPLAY
P
ORT
—Use
and
to enable or disable DisplayPort input.
NOTE:
You cannot disable your current input source. At anytime, a minimum of
two input sources have to be enabled.
PICTURE (in PC Mode)
Using the Picture menu, you can adjust the display settings of your projector. The
Picture menu, provides the following options:
V
IDEO
MODE
—Allows you to optimize the display image: Presentation, Bright,
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings). If you adjust the settings for Brightness, Contrast,
Saturation, Sharpness, Tint, and Advanced, the projector automatically switches
to Custom.
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced the projector automatically switches to Custom.
B
RIGHTNESS
—Use
and
to
adjust the brightness of the image.
C
ONTRAST
—Use
and
to adjust the display contrast.
A
DVANCED
—Press
to activate Picture Advance Menu. See "PICTURE