Dell Vostro 1015 (Mid 2009) - Manual (Page 65)

System
Information
This section lists the primary hardware features of your computer. There are no configurable options in this section.
l System Information
¡ BIOS Version
¡ Service Tag
¡ Asset Tag
¡ Ownership Tag
l Memory Information
¡ Memory Installed
¡ Memory Available
¡ Memory Speed
¡ Memory Channel Mode
¡ Memory Technology
¡ DIMM A Size
¡ DIMM B Size
l Processor Information
¡ Processor Type
¡ Core Count
¡ Processor ID
¡ Current Clock Speed
¡ Minimum Clock Speed
¡ Maximum Clock Speed
l Device Information
¡ Primary Hard Drive
¡ Fixed Bay Device
¡ Video Controller
¡ Video BIOS Version
¡ Video Memory
¡ Panel Type
¡ Native Resolution
¡ Audio Controller
¡ Modem Controller
¡ Wi-Fi Device
¡ Bluetooth® Device
Battery
Information
Indicates the primary battery status. Also displays the type of AC adapter connected to the computer.
Boot Sequence
The computer attempts to boot from the sequence of devices specified in this list:
l Diskette drive
l USB Storage Device
l CD/DVD/CD-RW Drive
l Internal hard drive (IRRT)
l Cardbus NIC
l Onboard NIC
This list specifies the order that the BIOS searches for devices while trying to find an operating system to boot.
To change the boot order, select the device to be changed in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys
to change the boot order of the device.
To remove devices for the boot list, clear the check boxes.
Date/Time Displays current date and time settings.
System Configuration
Option Description
NOTE:
The System Configuration group contains options and settings relater to integrated system devices. (Depending on your computer and
installed devices, the items listed in this section may or may not appear.)
Integrated NIC
Enables or disables the onboard LAN controller.
Default setting: Enabled w/PXE
SATA Operation
This option configures the operating mode of the internal SATA hard drive controller. The settings are Disabled, ATA, and AHCI.
Default setting: AHCI
Miscellaneous
Devices
Use the check boxes to enable/disable the following devices:
l Internal Modem
l Microphone
l Camera
l Media Card, PC Card and 1394
l External USB Port
l ExpressCard
Default setting: All enabled
Video
Option Description
LCD Brightness This option (represented by a slider bar for On Battery and On AC) sets the panel brightness when the ambient light sensor is off.
Security