Dell SP2009WFP Monitor - Manual (Page 19)

Power Save Audio Allows you to turn on or off the power to the audio during the audio power save mode.
Default is "On".
On — Allows you to turn off the power to the sound bar during monitor standby.
Off — Allows you to turn on the power to the sound bar during monitor standby.
Reset Audio Setting Resets your monitor audio settings to the factory defaults.
Exit Menu
Press to exit the OSD main menu and press to accept changes.
OTHER SETTINGS
Back
Press to go back to the main menu.
Language Allows you to set the OSD display to one of five languages: English, Espanol, Francais, Deutsch, or Japanese.
Menu Transparency Allows you to adjust the OSD background from opaque to transparent.
Menu Timer Allows you to set the time for which the OSD remains active after you press a button on the monitor.
Use the and buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.
Menu Lock
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked except
button.
NOTE: When the OSD is locked, pressing the menu button takes you directly to the OSD settings menu, with 'OSD Lock' pre
selected on entry. Press and hold button for 15 seconds to unlock and allow user access to all applicable settings.
Button Sound Turns on or off the button sound.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like
the brightness, color balance etc.
Enable (Default): Optimizes the performance of your monitor and provides a better customer experience.
Disable: Disables the DDC/CI option and the following message appears on the screen.
Select Yes to disable DDC/CI or No to return.
LCD Conditioning LCD conditioning helps eliminate any image retention and may take several hours.
NOTE: Severe cases of image retention are known as burn-in. LCD Conditioning does not remove burn-in.
Disable: This is the default option.
Enable: Enables LCD conditioning and the following message appears on the screen. Select Yes to proceed and No to return.