Dell S1909WN Monitor - Manual (Page 22)

Back to Contents Page
Setting Up the Monitor
Dell™ S1909WN Flat Panel Monitor User's Guide
Attaching the Base
Connecting the Monitor
Attaching the Soundbar (optional)
Removing the Base
Attaching the Base
Connecting Your Monitor
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer.
Connecting the blue VGA cable
NOTE: The base is detached when the monitor is shipped from the factory.
After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.
1. Place the monitor on a stable flat table.
2. Fit the groove on the base onto the riser of the monitor.
3. Push the hook to lock the stand base.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions .