Dell UP3214Q Monitor - Manual (Page 34)

34  Operating the Monitor
NOTE: To ensure optimal color accuracy it is
not recommended to adjust the Contrast or
Brightness settings after calibrating CAL1 and
CAL2. It is recommended to calibrate CAL1 and
CAL2 to the same desired luminance level before
turning on Zonal Color Space.
Contrast (2) Allows you to adjust the contrast on the left side
of the screen when Zonal Color Space or/and PBP
Mode is turned on.
Border Allows you to turn the blue border Off or On. The
border is to indicate the section of the screen that
may be in a different color space.
Hue This feature can shift color of video image to
green or purple. This is used to adjust the desired
flesh tone color. Use
or to adjust the hue
from ‘0’ to ‘100’ .
Press to increase the green shade of the video
image.
Press to increase the purple shade of the video
image.
NOTE: Hue adjustment is available only for Movie
and Game mode.
Saturation This feature can adjust the color saturation of the
video image. Use
or to adjust the saturation
from ‘0’ to ‘100’.
Press to increase the monochrome appearance
of the video image.
Press to increase the colorful appearance of the
video image.
NOTE: Saturation adjustment is available only for
video input.
Reset Color
Settings Resets your monitor’s color settings to the factory
defaults.