Dell Inspiron 15 (3531, Mid 2014) - Manual (Page 40)

Replacing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the palm rest with the screw holes on the
computer base and snap the palm rest into place.
2 Replace the screws that secure the palm rest to the computer base.
3 Adhere the power-button cable to the palm rest.
4 Slide the touchpad cable and the power-button cable into the system-
board connectors and press down on the connector latches to secure
the cables.
5 Close the display and turn the computer over.
6 Replace the screws that secure the palm rest to the computer base.
7
Turn the computer over and open the display as far as possible.
Post-requisites
1 Replace the keyboard .
2 Replace the base cover .
3 Replace the battery .
40