Plug and play capability, Flat panel specifications – Dell Crystal Monitor User Manual
Page 6
Pin Number
4-pin Side of the connector
1
VCC
2
DMD
3
DPD
4
GND
NOTE:
The USB connector is only available for webcam.
NOTE:
USB 2.0 capability requires 2.0
-capable computer.
NOTE:
The USB interface of the monitor works ONLY when monitor is powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re
enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings, if desired.
Flat Panel Specifications
Screen type
Active matrix - TFT LCD
Screen dimensions
22 inches (22-inch viewable image size)
Preset display area:
Horizontal
473.76 mm (18.65 inches)
Vertical
296.1 mm (11.66 inches)
Pixel pitch
0.282 mm
Viewing angle
160° (vertical) typ, 160° (horizontal) typ
Luminance output
270 cd/m ²(typ)