beautypg.com

Camera problems – Dell Crystal Monitor User Manual

Page 26

background image

 

 

Camera Problems

Sync Problems

Screen is scrambled or appears torn.

l

Perform monitor reset.

l

Perform monitor self-test feature check to determine if scrambled screen appears
in self-test mode.

l

Check for damaged leads on the connector head.

l

Boot up in the Safe Mode.

LCD Scratched

Screen has scratches or smudges.

l

Turn monitor off and clean the screen.

l

For cleaning instruction, see

Cleaning Your Monitor

.

Safety Related Issues

Visible signs of smoke or sparks.

l

Do not perform any troubleshooting steps.

l

Monitor needs to be replaced.

Intermittent Problems

Monitor malfunctions on and off.

l

Ensure monitor is in proper video mode.

l

Ensure video cable connection to computer and to the flat panel is secure.

l

Perform monitor reset.

l

Perform monitor self-test feature check to determine if the intermittent problem
occurs in self-test mode.

Image Retention (from a
static image) 

Faint Shadow from the static image
displayed appears on the
screen.            

l

Use the Power Management feature to turn off the monitor at all times when not
in use. Alternatively, use a dynamically changing screensaver left on the
monitor for a long period of time. 

l

In OSD menu, under Other Settings, LCD Conditioning, select Enable. Using this
option may take several hours before the image is eliminated.

NOTE: Image Burn-in is not covered by your warranty.

COMMON

SYMPTOMS

WHAT YOU

EXPERIENCE

POSSIBLE SOLUTIONS

No Power

The camera is
not working
and the LED is
off

If the monitor has no power, see Troubleshooting Your Monitor.

Verify if the camera is detected by Windows.

Reinstall the camera drives using the Webcam Software CD. See

Using the Camera

for more information.

Camera is not
detected

The camera is
not working
and the LED is
on

Remove and insert the USB cable.

Reinstall the Webcam Software and drivers. See

Installing Your Webcam Software

for more information.

Poor Focus

The camera
captures fuzzy
or unclear
videos and
pictures

Verify the camera lens is clean.

Clean the camera surface using a damp, soft lint-free cloth.

Increase the available ambient light or change the source of light.

Reset the camera defaults through the Dell Webcam Console. See

Using the Camera

for more information.

Ensure that the Color Depth settings in Display Properties is set to  16-bit color or higher.     

NOTE: Lower color depth settings result in poor-quality images.

NOTE: The integrated webcam operates at a lower resolution than most commercially available digital cameras. Most
commercial digital cameras are 4 mega pixel or higher. The integrated webcam operates up to 2.0 mega pixel.

Poor quality
video on the
Internet

The camera
captures
grainy images
while using it
on the
Internet

Check your internet connection speed. A slow Internet connection could cause similar problems with the video. It is
recommended to use a broadband connection with good throughput.

Color Problem The images

are tinted red,
blue, or green

Reset the camera defaults through the Dell Webcam Console. See

Using the Camera

for more information.

Adjust the camera color settings through Dell Webcam Console. See

Using the Camera

for more information.

No Image

Blank screen

Increase the available ambient light, change the direction of the camera, or change the source of light.

Reset the camera defaults through the Dell Webcam Console. See

Using the Camera

for more information.

Adjust the contrast levels using the Dell Webcam Console.  See 

Using the Camera

for more information.

Ensure the camera is detected correctly by the Windows operating system.

Slow frame
rate in video
capture mode

The capture
video is not
smooth

The video capture especially in high resolution is a resource intensive task, reduce the video recording resolution. Select No
Compression
for video in the Video Recording settings.

Install the latest DirectX and the latest webcam driver.

Audio and
video is not
synchronized

The captured
video and
audio are not
synchronized

The video capture, especially in high resolution is a resource intensive task. Reduce the video recording resolution. Select No
Compression
for video in the Video Recording settings.

Microphone is
not working

The webcam
captures video
but not sound

Speak closer to the microphone.

The integrated microphone is designed to have a wider reception area for recording but it has limitations. Try moving closer 
to the microphone or ensure that you are within the recording area for the microphone.