Dell PowerVault MD3000 - Manual (Page 26)

26
׀
Dell PowerVault Data MD3000 Support Matrix
Configurations with two MD3000s
Figure 12 and Figure 13 show supported configurations connecting two
MD3000s to 1 or 2 hosts. Figure 12 shows a single host connected to two
separate MD3000 storage arrays. Figure 13 shows two hosts connected to two
separate MD3000 storage arrays. These configurations are only supported with
Second Generation firmware on the MD3000 storage arrays.
NOTE: Multiple MD3000 arrays connected to one or more servers might not be
qualified on the solutions listed in the Supported Enterprise Solutions table
shown earlier in this document. To see if this configuration has been qualified
please go to the appropriate solution web site to review the reference
architecture
Figure 12. Single Host connected to Two MD3000 Storage Arrays