Dell Studio 1535 (Mid 2008) User Manual
Page 35
Troubleshooting
35
Starting the Dell 32 Bit Diagnostics From the Drivers and Utilities Media
NOTE:
Depending on which Dell computer you have purchased there may not be
an additional extended Dell 32 Bit Diagnostics available on the Drivers and Utilities
media referenced in this section.
1 Insert your Drivers and Utilities media.
2 Shut down and restart the computer.
3 When the DELL logo appears, press
NOTICE:
Keyboard failure may result when a key on the keyboard is held
down for extended periods of time. To avoid possible keyboard failure, press and
release
4 At the boot device menu, use the up- and down-arrow keys to highlight
CD/DVD/CD-RW, and then press
NOTE:
The Quickboot feature changes the boot sequence for the current
boot only. Upon restart, the computer boots according to the boot sequence
specified in system setup.
5 Select the Boot from CD-ROM option from the menu that appears, and
then press
6 Type 1 to start the Drivers and Utilities menu, and then press
7 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple
versions are listed, select the version appropriate for your computer.
8 At the Dell Diagnostics Main Menu, select the test you want to run.
NOTE:
Write down the error codes and problem descriptions exactly as they
appear and follow the instructions on the screen.
9 After all tests have completed, close the test window to return to the Dell
Diagnostics Main Menu.
10 Remove your Drivers and Utilities media and close the Main Menu
window to exit Diagnostics. Restart the computer.