Avocent ACS V6000 - Manual (Page 36)

Parameter Description
DTR Off Interval
Interval in seconds used by DTR Mode Off Interval in milliseconds.
Default: 100.
Line Feed Suppression
Enables the suppression of the LF character after the CR character.
Default: Disabled.
Null After CR
Suppression Enables the suppression of the NULL character after the CR
character. Default: Disabled.
Transmission Interval
The interval the port waits to send data to a remote client in
milliseconds. Default: 20.
Break Sequence
Sequence used to send a break signal to the serial port. Not available
for Raw. Default: ~break.
Break Interval
Interval for the break signal in milliseconds. Not available for Raw.
Default: 500.
Log In/Out Multi
Session Notification Enables the notification to multi-session users when a new user logs in
or a user logs out. Not available for Raw. Default: Disabled.
Informational Message
Notification Displays an information message when a target session is opened. Not
available for Raw. Default: Enabled.
Data Buffering
Status Enables or disables data buffering. Default: Disabled.
Type
Displays the type of data buffering: Local - stores the data buffering file
in the local file system. NFS - stores the data buffering file in the NFS
server. Syslog - sends the data to the syslog server. DSView - sends
the data to the DSView 3 software. Default: Local.
Time Stamp
When enabled, adds the time stamp to the data buffering line for a
Local or NFS database. Default: Disabled.
Log-in/out Message
Includes special notification for logins and logouts in data buffering.
Default: Disabled.
Serial Session Logging
Enabled - stores data at all times. Disabled - stores data when a CAS
session is not opened. Default: Enabled.
Alerts
Status
A special event notification will be generated when input data matches
one of the alert strings. Default: Disabled.
Alert Strings Strings used to generate event notifications. Default: Empty.
Chapter 3: Accessing a Virtual Console Server via the Web Manager 31