Dell SE197FP Monitor - Manual (Page 21)

Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock'adjustment and then use 'Phase' again.
NOTE: This function may change the width of the display image. Use the 'Horizontal' function of the 'Position' menu to center
the display image on the screen.
Color
Settings:
Adjusts the color temperature and saturation.
Normal Preset Selected to obtain the default (factory) color settings.
Blue Preset This color setting gives a bluish tint and is used for text-based applications such as spreadsheets, programming, text editors, and so
on.
Red Preset This color setting gives a reddish tint and is used for color-intensive applications such as photograph image editing, multimedia,
movies, and so on.
User Preset Use the +/- buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from '0' to
'100'.
NOTE: 'Color temperature' is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue'
and 'Red') favor blue and red accordingly. Select each one to see how each range suits your eye; or utilize the 'User Preset'
option to customize the color settings to your exact choice.
OSD Settings: Each time the OSD opens, it displays in the same location on the screen. 'OSD Settings' (horizontal/vertical) provides control over this
location.
Horizontal
Position
- and + buttons move OSD to the left and right.
Vertical
Position
- and + buttons move OSD down and up.
OSD Hold
Time:
The OSD stays active for as long as it is in use.
'OSD Hold Time': Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
NOTE: Default 'OSD hold time' is 20 seconds.
OSD Lock Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons, except Menu, are
locked.
All buttons can be locked or unlocked. Press the 'Menu' button for over 15 seconds to unlock the OSD menu.