Remote setup and configuration – Dell OptiPlex 990 (Early 2011) User Manual
Page 65

IPv4 Address
0.0.0.0
Subnet Mask Address
0.0.0.0
Default Gateway Address
0.0.0.0
Preferred DNS Address
0.0.0.0
Alternate DNS Address
0.0.0.0
Wired LAN IPv6 Configuration
IPv6 Feature Selection
Disabled *
Enabled
Below configuration page will only available if enabled selected
IPv6 Interface ID Type
Random ID *
Intel ID
Manual ID
IPv6 Address
blank
IPv6 Default Router
blank
Preferred DNS IPv6 Address
blank
Alternate DNS IPv6 Address
blank
Activate Network Access Y / N
Unconfigure Network Access Y / N
Remote Setup and Configuration
Current Provisioning Mode
Provisioning Record
RCFG
Start Configuration
Y / N
Provisioning Server IPv4/IPv6 blank
Provisioning Server FQDN
blank
TLS PSK
Set PID and PPS
blank
Delete PID and PPS
Y / N
TLS PKI
Remote Configuration
Disabled
Enabled *
PKI DNS Suffix
blank
Manage Hashes
*Default setting
**May cause Intel AMT partial unprovision
1
Intel ME Platform State Control is only changed for Management Engine (ME) troubleshooting.
2
In Enterprise mode, DHCP automatically loads the domain name.
3
Un-provision setting only seen if the box is provisioned.