Dell XPS 12 (9Q33, Mid 2013) - Manual (Page 45)

Removing the Windows-Button Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Remove the display back-cover. See "Removing the Display Back-Cover" on
page 40.
Procedure
1 Remove the screws that secure the Windows-button board to the display panel.
2 Turn the Windows-button board over and disconnect the Windows-button
board cable from the board.
3 Lift the Windows-button board off the display panel.
2
1
3
1 screws (2) 2 Windows-button board cable
3 Windows-button board
Removing the Windows-Button Board | 45