Configuring your system remotely, Special administration console (sac) – Dell PowerVault DP600 User Manual

Page 21

Text mode
Original mode

Configuring Your System Remotely

Special Administration Console (SAC)

NOTE:

Using SAC requires a female-to-female serial console cable to connect

directly from a client system to the PowerVault storage system’s serial port, as
shown in Figure 2-1.

Figure 2-1.

Using the Console Cable to Connect to SAC

NOTE:

Ensure that the terminal emulation software settings on the client system

are set to 115200 baud, 8 data bits, No parity, and 1 stop bit.

In a non-DHCP environment, use command-line interface (CLI) support in
SAC to connect (through a serial port) to a system running Windows Storage
Server 2003. Then, configure network settings. After you configure the