Dell PowerVault 770N (Deskside NAS Appliance) - Manual (Page 11)

The cluster connections to the public network (for client access of cluster resources) require one or more identical network
adapters supported by the system for each cluster node. Configure this network in a mixed mode (All Communications) to
communicate the cluster heartbeat to the cluster nodes if the private network fails for any reason.
Other Documents You May Need
The System Information Guide provides important safety and regulatory information. Warranty information may be
included within this document or as a separate document.
The Platform Guide provides information about the platforms that support the NAS SCSI cluster configuration.
The Rack Installation Guide and Rack Installation Instructions document that was included with your rack solution
describes how to install your system into a rack.
The Getting Started Guide provides an overview of initially setting up your system.
The User's Guide for your PowerVault system describes system features and technical specifications, SCSI drivers, the
System Setup program (if applicable), software support, and the system configuration utility.
The Installation and Troubleshooting Guide for your PowerVault system describes how to troubleshoot the system and
install or replace system components.
The Dell PowerVault 77xN NAS Systems Administrator's Guide provides system configuration, operation, and
management information.
The Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems Installation and Service Guide describes how to
install and troubleshoot the PowerVault 200S, 201S, 210S, and 211S storage systems and install or replace system
components.
The Dell PowerVault 220S and 221S System Installation and Troubleshooting Guide describes how to install and
troubleshoot the PowerVault 220S and 221S storage systems and install or replace system components.
The PERC documentation includes information on the SCSI RAID controller.
The Dell OpenManage™ Array Manager documentation provides instructions for using the array management software
to configure RAID systems.
Documentation for any components you purchased separately provides information to configure and install these
options.
Updates are sometimes included with the system to describe changes to the system, software, and/or documentation.
NOTE: Always read the updates first because they often supersede information in other documents.
Release notes or readme files may be included to provide last-minute updates to the system documentation or
advanced technical reference material intended for experienced users or technicians.
Back to Contents Page