Dell 7609WU Projector - Manual (Page 32)

Using Your Projector 32
• 4:3 — The input source scales to fit the height of the screen and projects a
4:3 image.
• Wide — The input source scales to fit the width of the screen to project a
wide screen image.
N
ETWORK
S
ETTINGS
—Allows you to manage the network configuration. Press Enter
to open the Network Settings menu.
• DHCP—Select On to assign an IP address to the projector from a DHCP server
automatically. Select Off to assign an IP address manually.
• IP Address—Press Enter to set up an IP address. Press or t o select the
number position, or to change the number.
• Subnet Mask—Press Enter to set up a subnet mask number. Press or t o
select the number position, or to change the number.
• Gateway—Press Enter to set the default gateway of the network connected to the
projector. Press or t o select the number position, or to change the
number.
• DNS—Type in the IP address of the DNS server on the network connected to the
projector. 12 numeric characters are used.
• Apply Change—Press Enter to confirm the settings.
• Reset Network—Press Enter to reset to the default settings.
• Network—Select On to activate and Off to deactivate network connections.
DC 5V P
OWER
—Select this option to turn the DC 5V power On or Off.
VGA L
OOP
T
HROUGH
—Select this option to turn the VGA Loop through On or Off.