Dell OptiPlex 790 (Early 2011) - Manual (Page 60)

Security
these settings are capable of preventing access to Intel RAID
(CTRL+I) or Intel Management Engine BIOS Extension (CTRL
+P/F12)
• Enable — User may enter OROM configuration screens via
the hotkey.
• One-Time Enable — User may enter OROM configuration
screens via the hotkeys on next boot only. After next boot,
the setting will revert to disabled.
• Disable — User may not enter OROM configuration
screens via the hotkey.
This option is set to Enable by default.
Admin Setup Lockout Allows you to enable or disable the option to enter Setup when
an Admin password is set. This option is not set by default.
Performance
Multi Core Support This field specifies whether the process will have one or all
cores enabled. The performance of some applications will
improve with the additional cores. This option is enabled by
default.
Intel® SpeedStep™ Allows you to enable or disable the Intel SpeedStep mode of
the processor. This option is enabled by default.
C States Control Allows you to enable or disable the additional processor sleep
states. This option is enabled by default.
Intel® TurboBoost™ Allows you to enable or disable Inel TurboBoost mode of the
processor.
• Disabled — Does not allow the TurboBoost driver to
increase the performance state of the processor above the
standard performance.
• Enabled — Allows the Intel Turbo driver to increase the
performance of the CPU or graphics processor.
This option is enabled by default.
Hyper-Thread Control Allows you to enable or disable the Hyper-Threading
Technology. This option is enabled by default.
60