Dell Inspiron 15 (5543, Early 2015) - Manual (Page 58)

Replacing the Status-Light
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw hole on the status-light board with the screw hole on the
palm rest.
2 Replace the screw that secures the status-light board to the palm rest.
3 Adhere the status-light board cable to the palm rest.
4 Align the right speaker with the alignment posts on the palm-rest
assembly.
Post-requisites
1 Replace the base frame .
2 Replace the keyboard .
3 Replace the fan .
4 Follow the procedure from step 3 to step 5 in replacing the hard drive .
5 Replace the battery .
6 Replace the base cover .
58