Dell Alienware Area-51 ALX (Late 2009) - Manual (Page 73)

073
073
/
CHAPTER 14: PROCESSOR
3
2
4
6
1
5
7
1 tab 4 socket 7 processor pin-1 indicator
2 processor cover 5 center cover latch
3 processor 6 release lever
Replacing the Processor
Follow the instructions in “Before You Begin” on page 1. 6.
Unpack the new processor, being careful not to touch the underside of the 2.
processor.
CAUTION: You must position the processor correctly in the socket to
avoid permanent damage to the processor and the computer when you
turn on the computer.
If the release lever on the socket is not fully extended, move it to that 3.
position.
Align the pin-1 corners of the processor and socket. 4.
CAUTION: To avoid damage, ensure that the processor aligns properly
with the socket, and do not use excessive force when you install the
processor.
Set the processor lightly in the socket and ensure that the processor is 5.
positioned correctly.
When the processor is fully seated in the socket, close the processor cover. 6.
Ensure that the tab on the processor cover is positioned underneath the
center cover latch on the socket.
Pivot the socket release lever back toward the socket, and snap it into place 7.
to secure the processor.