Dell PowerVault NX3200 - Manual (Page 2)

Setting Up Your Dell PowerVault NAS System (continued)
Printed in the U.S.A.
2013 - 03
4
|
Initial Confi guration
When you start your NAS system running Windows 1.
Storage Server 2012 for the fi rst time, press OK on
the Default Password screen.
Note: Before changing the password, ensure
that you change the system language
according to your preference.
To change the default language, navigate to 2. C:\Dell
MUI, and run the appropriate language batch fi le.
Follow the prompts to install your
preferred language.
To change your administrator password, press 3.
and click Change a Password.
Server Manager starts automatically the fi rst time you
log on. In Server Manager, click Confi gure this local
server to:
Change the computer name •
Specify the domain •
Check for latest Windows updates •
Specify the time zone •
Configure remote desktop •
Click on the bottom left corner of the screen to get to
the Start screen to navigate to a particular application.
5
|
Additional Information
Documentation
To check for the documentation for your Dell PowerVault NAS system, see dell.com/support/manuals and enter the Service Tag of your system. To
locate the Service Tag of your system, see the topic Locating Your System Service Tag in this document. The following documents are available for
your PowerVault NAS system.
Title Description
Getting Started Guide Provides an overview of system features, setting up your solution, and technical specifi cations.
Owner’s Manual Provides information about solution features and describes how to troubleshoot
the system and install or replace system components.
Rack Installation Instructions Describes how to install your system into a rack. This document is also shipped with your rack
solution.
Administrator’s Guide Provides information about confi guring and managing the system.
Troubleshooting Guide Provides information about troubleshooting the software and the system.
Server Administrator Storage Management User’s
Guide
Discusses installing, confi guring, and using Dell OpenManage Server Administrator software to
manage your PowerVault NAS system.
Note : For the Server Administrator Storage Management User’s Guide and other related Dell
OpenManage documentation, see dell.com/openmanagemanuals.
Documentation Feedback
If you have any feedback for this document, write to [email protected] . Alternatively, you can use the Feedback link at the top
right corner of your documentation web page.
© 2013 Dell Inc. All rights reserved.
Dell™, the DELL
logo, and PowerVault™ are trademarks of Dell Inc.
0VX5CWA00
Launching Remote Desktop
If Dynamic Host Confi guration Protocol (DHCP) and Domain Name System (DNS) are implemented on your network, your system automatically confi gures the
network settings. You can launch Remote Desktop from a client and remotely access the NAS system using the default system name.
For example, in the Remote Desktop Connection window, type D, where
is your system Service Tag and click Connect. To locate
the Service Tag of your system, see the topic Locating Your System Service Tag in this document. The default password for the NAS system is Stor@ge!