Dell Dimension 4300 - Manual (Page 44)

settings and values are set by the computer and cannot be changed. When appears to the right of an option, press to access a pop-
up menu of additional options.
l Key functions – A line of boxes across the bottom of all system setup screens that lists keys and their functions within the system setup program.
l Help – Press for information on the option that is selected (highlighted).
The following table shows CPU Information option information.
The following table shows Integrated Devices (Legacy Select Options) information.
Option Function
System Time Displays the system time.
System Date Displays the system date.
Diskette Drive A: Displays floppy drive details.
Primary Drive 0: Displays primary hard drive 0. The default is Auto.
Primary Drive 1: Displays primary hard drive 1 (if installed). The default is Off.
Secondary Drive 0: Displays secondary hard drive 0. The default is Auto.
Secondary Drive 1: Displays secondary hard drive device type. The default is Off.
Boot Sequence Displays boot sequence when is pressed.
System Memory Displays amount of system memory.
AGP Aperture Displays amount of aperture memory. The default is 128 MB.
CPU Information Displays CPU information when is pressed.
Integrated Devices (Legacy Select
Options) Displays integrated device options when is pressed.
PCI IRQ Assignments Displays PCI IRQ assignments when is pressed.
IRQ Reservations Displays the IRQ reservations when is pressed.
System Security Displays system security options when is pressed.
Keyboard Numlock Turns the Keyboard NumLock option on and off. The default is On.
Report Keyboard Errors Displays keyboard errors when set to Report. The default is Report.
Auto Power On Allows auto power-on. The default is Disabled.
Remote Wake Up Allows remote Wake on LAN. (Dell does not support Wake on LAN in S3 or S5 Suspend Modes on this Dimension™
system.) The default is Off.
AC Power Recovery Enables AC power recovery to occur. The default is Last.
Fast Boot Turns the fast boot option on and off. The default is Off.
Suspend Mode Displays the suspend state used by the computer. The default is S3.
System Event Log Displays the system event log when is pressed.
Asset Tag Displays asset tag information.
Option Function
CPU Speed Sets the CPU speed. The default is Normal.
Bus Speed Displays the bus speed.
Processor ID Displays processor ID.
Clock Speed Displays clock speed.
Cache Size Displays cache size.
Option Function
Sound Turns the integrated sound off and on. The default is On.
Mouse Port Turns the mouse port off and on. The default is On.
USB Emulation Turns USB emulation off and on. The default is On.
USB Controller Turns the USB controller off and on. The default is On.
Serial Port 1 Sets serial port options and turns the port off and on. The default is Auto.
Parallel Port Displays parallel port settings when is pressed. The default mode is PS/2 and the I/O address default is 378h.
IDE Drive Interface Sets the IDE drive interface options. The default is Auto.
Diskette Interface Sets diskette interface options. The default is Auto.
PC Speaker Turns the PC speaker off and on. The default is On.
Primary Video Controller Sets the primary video controller. The default is AGP.
Video DAC Snoop Turns the video DAC Snoop off and on. The default is Off.