Dell UPS 1920T - Manual (Page 26)

26 |
Software Installation on Windows Server 2008 Server Core
Configuring the UPS from a Remote Machine
After the installation, you can verify and modify the shutdown settings of the Agent through a remote
PC with a graphical user interface (GUI). Open the Shutdown Settings window (see Figure 19) to view
settings.
NOTE: If the Agent is running normally, but does not appear in the the remote computer local area network
(LAN), disable the firewall, using the netsh firewall set opmode disable command.
In this example, the settings Begin Shutdown Immediately if Battery Low, System and Shutdown are
enabled, which means the server is protected by the software. If the AC fails, or if the battery is low, the
system shuts down.
Figure 19. Shutdown Settings Window