Dell PowerEdge 7250 - Manual (Page 2)

and connect through a telnet connection to run the application.
* Only one telnet session at a time can be connected to the SOL Proxy
service.
* Make sure you have assigned a valid BMC username and password before
you connect to your system's BMC using the BMC Management Utility.
Even though your system's BMC firmware does not allow null usernames
or null passwords to be set, the BMC Management Utility does not limit
this functionality. If you do not explicitly provide a valid BMC
username and password when using the BMC Management Utility to log in
to your system's BMC, the BMC firmware will use a null username and
null password as defaults, resulting in a "Login Not Authorized"
error.
NOTE: The "Baseboard Management Controller User's Guide" and the
IMPI Shell help incorrectly list the following arguments for
the "ipmish -com" option as optional:
"-baud" (baud rate)
"-flow" (flow control)
"-u" (username),
"-p" (password)
These arguments are required to establish a remote connection
to a managed system using the serial channel.
======================================================================
NOTES FOR USING THE ASSET TAG UTILITY
======================================================================
* The Asset Tag utility files are located in the "Utilities\AssetTag"
directory on the "Resource" CD.
The files are also copied to the "EFI\Service\AssetTag" directory
in the EFI Service Partition when the Service Partition is created
using the "Resource" CD. The Asset Tag utility can be run from either
of these locations
See the "Asset Tag Tool Release Notes" on the "Resource" CD for more
information about using the Asset Tag Utility.
######################################################################
KNOWN ISSUES
######################################################################
This section provides information about open issues with your systems
management software.
======================================================================
ISSUES FOR THE BMC MANAGEMENT UTILITY
======================================================================