Dell UPS 1920R - Manual

Dell Technical Information Note (TIN UPS001)
This Dell Technical Information Note describes how to eliminate a
common error message that occurs when implementing shutdown with
redundant power sources in virtualized environments using Dell UPS
Management Software Release 2.
Authors
Stephen Tavitas, Product Marketing Manager,
Enterprise Product Group, Data Center Infrastructure
Brian Bartell, Eaton Corp., Sustaining Engineer
Barry Gruetzmacher, Eaton Corp., Global Programs
Manager for Dell
This document is for informational purposes only and may contain typographical errors and technical
inaccuracies. The content is provided as is, without express or implied warranties of any kind.
© 2012 Dell Inc. All rights reserved. Dell and its affiliates cannot be responsible for errors or omissions
in typography or photography. Dell, the Dell logo, and PowerEdge are trademarks of Dell Inc. Intel and
Xeon are registered trademarks of Intel Corporation in the U.S. and other countries. Microsoft,
Windows, and Windows Server are either trademarks or registered trademarks of Microsoft Corporation
in the United States and/or other countries. Other trademarks and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Dell disclaims
proprietary interest in the marks and names of others.
October 2012| Rev 1.0
Dell UPS Management Software:
Activating redundancy and
virtualization modules