Dell PowerVault 201S (SCSI) User Manual
Dell Computer hardware
(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\Hendrix\Ts\standalone\5920Pam0.fm
DELL CONFIDENTIAL - PRELIMINARY 2/15/99
™
P/N 5920P
December 1998
&
www.dell.com
,QVWDOOLQJWKH'HOO3RZHU9DXOW
[66WDELOL]HUVIRU6WDQGDORQH
&RQILJXUDWLRQ
Perform the following steps to attach the stabilizers to the chassis, which converts a
Dell PowerVault 20
xS storage system to a free-standing, vertical configuration:
1.
Carefully turn the chassis upside down.
2.
Locate the two pairs of screw holes on the bottom panel.
3.
Align one of the stabilizers with one pair of screw holes, and then align the other
stabilizer with the other pair of screw holes, as shown in Figure 1.
)LJXUH$WWDFKLQJWKH6WDELOL]HUV
stabilizers (2)
bottom of chassis
This manual is related to the following products: