Dell FDP SoundBar with Virtual Surround (AY511) - Manual (Page 7)

No audio Soundbar has
power—power
indicator is on. • Ensure that the audio cable is
connected to your computer's audio
out connector.
• Set all volume controls in your audio
application and Microsoft®
Windows® operating system to
their maximum.
• Play audio on your computer (for
example, an audio CD, or MP3).
• Increase the volume level on the
soundbar by touching the volume up
control. The white LED blinks when
the
control is touched.
• Reconnect the audio line-in
connector to the soundbar.
• Test the soundbar using another
audio source (for example, a
portable CD player).
• On your computer, open the
Control Panel and click Sound.
Ensure that the computer on-board
audio or the sound card is enabled.
Try different ports. Reinstall the on-
board audio or the sound card
drivers. Restart the computer. Test
the audio output using a speaker
that is known to be working.
Problem Observation Possible Solutions
AY511.fm Page 15 Tuesday, September 29, 2009 2:21 PM