Computer base and components, Wireless sniffer board, Removing the wireless sniffer board – Dell Vostro 1500 (Mid 2007) User Manual
Page 2: Replacing the wireless sniffer board
Back to Contents Page
Computer Base and Components
Dell™ Vostro™ 1500 and Inspiron™ 1520/1521 Service Manual
Wireless Sniffer Board
Removing the Wireless Sniffer Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the optical drive (see
Removing the Optical Drive
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Bluetooth Card
).
8.
Remove the palm rest (see
Removing the Palm Rest
).
9.
Remove the M2 x3-mm screw that secures the wireless sniffer board to the base of the computer.
10.
Lift the wireless sniffer board out of the computer.
11.
Disconnect the sniffer cable from the wireless sniffer board.
Replacing the Wireless Sniffer Board
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
Do not disconnect the sniffer cable from the system board.