Exhausted cleaning media – Dell PowerVault 122T SDLT 320 (Autoloader) User Manual
Page 10
8
Dell PowerVault DLT, VS, and SDLT Media Handbook Version 2.0
www
.dell.com | support.dell.com
Exhausted Cleaning Media
If a cleaning tape is inserted into a DLT/SDLT drive and the light remains on after tape eject,
the cleaning tape may be exhausted. See the following to determine that you are using the
proper cleaning tape for your drive type. If so, try another cleaning tape. Depending on the drive
model, if the light does not go off, there may be a hardware fault in the drive or expired media is
being used.
Figure 1-12.
SDLT Cleaning Tape
Light gray in color
and designated as
"SDLT Cleaning
Tape."
Specifically designed for
SDLT220 and SDLT320
drives.
If expired cleaning media
is reused, the cartridge
will get ejected and
cleaning light will stay
on.
NOTE:
Do not use VS160
cleaning media to clean
SDLT drives.
340-3349
20 times. Tape can track
usage. On last
use, the
cleaning light
will go off and
the drive will
not eject
cartridge. User
must
manually eject
cartridge and
discard it from
future use.
Table 1-4.
Cleaning Media Types
Cleaning Media
Physical
Description
Characteristics
Part No
Life Span
Tracking
Table 1-5.
Cleaning Media Compatibility
Cleaning Tape
DLT4000
DLT7000
DLT8000
DLT1
VS80
VS160
SDLT220
SDLT320
Cleaning Tape III
Yes
Yes
Yes
No
No
No
No
No
DLT1/VS Cleaning
Tape
No
No
No
Yes
Yes
YES (not
recommended)
No
No
VS160 Cleaning Tape
No
No
No
No
No
Yes
No
No
SDLT Cleaning Tape
No
No
No
No
No
No
Yes
Yes