Chaparral VFS113 User Manual
Page 37
Configuring the Router
3-9
To change the Loop ID:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Host Configuration and press Enter.
The Host Configuration screen displays.
3
Select the topology you want and press Enter, or press Enter if the correct topology
is already selected.
The current setting is marked with an * next to it. For information about the topology
selection, see
Selecting the Topology on page 3-7
.
The Loop ID screen displays if Loop Topology was selected.
4
Select the option or number you want to use and press Enter.
The Router LUN screen displays. The text inside the parenthesis ( ) shows the current
Router LUN.
To
Do this
Let the FC loop initialization process
determine the Loop ID each time the
router powers up
■
Select SOFT and press Enter.
This is the default setting
Keep the same Loop ID for the router
at all times
■
Select the [Loop ID] you want to use
and press Enter.
This can be any number from 0 to 125.
Note: See
Appendix A, Address and Device Mapping
for more details on
how the value selected for the Loop ID will correspond to the AL_PA.