Dell M210X Projector - Manual (Page 43)

Problem (continued) Possible Solution (continued)
Partial, scrolling, or
incorrectly displayed image
1 Press the Auto Adjust button on the
remote control or the control panel.
2 If you are using a Dell™ Laptop computer,
set the resolution of the computer to XGA
(1024 x 768):
a Right-click the unused portion of your
Microsoft ® Windows ® desktop, click
Properties and then select Settings tab.
b Verify that the setting is 1024 x 768 pixels
for the external monitor port.
c Press (Fn+F8).
If you experience difficulty in changing
resolutions or your monitor freezes, restart all
the equipment and the projector.
If you are not using a Dell™ Laptop computer,
see your documentation. If images are not
displayed properly, please upgrade the video
driver of your computer. For a Dell computer,
see support.dell.com.
The screen does not display If you are using a Laptop computer, press
your presentation (Fn+F8).
Image is unstable or flickering Adjust the tracking in the OSD Display sub-
menu (in PC Mode only).
Image has vertical flickering Adjust the frequency in the OSD Display sub-
bar menu (in PC Mode only).
Image color is incorrect • If the display receives the wrong signal
output from the graphics card, please set
the signal type to RGB in the OSD Display
tab.
• Use Test Pattern in the Others menu.
Ensure that the colors of the test pattern
are correct.
Image is out of focus 1 Adjust the focus ring on the projector lens.
2 Ensure that the projection screen is within
the required distance from the projector
(3.28 ft [1 m] to 39.37 ft [12 m]).
Troubleshooting Your Projector 42