Dell PowerVault 745N - Manual (Page 11)

6. During the boot process, press when “F2=Setup” displays on the
screen (at the “Dell” splash screen just before POST starts).
7. In the BIOS setup screen, select Boot Sequence and press .
8. Ensure that Hard drive C is first in the list and press to exit the
Boot Sequence menu.
9. Select Hard-Disk Drive Sequence and press .
10. Ensure that Hard-disk-emulated USB flash drive is first in the list by
using the <+>\<-> keys and press .
The system screen should look similar to this:
11. Press again, select Save Changes and Exit, and press .
The system automatically shuts down and reboots from the USB Key.
12. When the Dell PowerVault NAS 745N menu displays, press <1> to select
Reinstall NAS system, and press .
The system screen should look similar to this:
Initial Release: 2 January 2007 11