Replacing the status light board – Dell Alienware M11x (Early 2010) User Manual
Page 25
Replacing the Status Light Board
1.
Follow the instructions in
Before You Begin
.
2.
Place the status light board on the palm rest assembly and replace the five screws that secure the status light board to the palm rest assembly.
3.
Connect the speaker lights cable to the connector on the status light board.
4.
Connect the status light board cable to the connector on the status light board and press down on the connector latch to secure the cable.
5.
Connect the power board cable to the connector on the status light board and press down on the connector latch to secure the cable.
6.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hinge cover (see
Replacing the Hinge Cover
).
9.
Replace the battery pack (see
Replacing the Battery Pack
).
10.
Replace the base cover (see
Replacing the Base Cover
).
Back to Contents Page
1
status light board
2
screws (5)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.