Power supply: dell precision 360 service manual, Power supply, Removing the power supply – Dell Precision 360 User Manual
Page 21
Power Supply: Dell Precision 360 Service Manual
file:///C|/infodev/2013/eDoc/ws360/SM/pwrsply.htm[2/18/2013 12:39:38 PM]
Power Supply
Dell Precision™ 360 Service Manual
CAUTION:
Before performing any of the procedures in this section, follow the safety instructions in the
System Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from
your body before you touch any of your computer's electronic components. You can do so by touching an
unpainted metal surface on the computer chassis.
Removing the Power Supply
1. Disconnect the DC power cables from the system board and the drives.
Note the routing of the DC power cables underneath the tabs in the computer frame as you release the tabs and
remove the cables from the system board and drives. You must route these cables properly when you replace them to
prevent their being pinched or crimped.
2. Remove the two screws that attach the power supply to the back of the computer frame.
3. On the mini-tower computer, press the release button located on the floor of the computer frame.
Mini-Tower Computer
Desktop Computer