Dell Projector 2300MP - Manual (Page 26)

Using Your Projector: Dell 2300MP Projector
file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage.htm[11/30/2012 2:18:57 PM]
Use this function to select the power saving delay period. Press "Yes" to go into the "set
time" sub menu.
Set Time (Min)
Set the power saving delay period as you prefer. When the projector is not receiving an
input signal for the selected period of time, the projector will automatically enter power
saving mode, and turn off the lamp. After a one-minute cooling period, the projector will
turn back on with detection of an input signal or by pressing the "Power" button. After two
hours the projector will turn off and must be turned on by pressing the power button on
the control panel or remote.
Auto Source
The projector will always automatically search for available input signals when Auto
Source is On, which is the default setting. Press the Source button with Auto Source
On to automatically search for the next available input signal. Selecting Off will lock on the
current input source. Set Auto-Source to Off to step through the different input signals
manually.
Eco Mode
Select On to operate the projector in lower power (150 Watts) for providing longer
lamp life and quiter operation with dimmer luminance output on the screen.
Select Off to resume the operation in normal power (200 Watts).
Language Menu