Clearing lcd error messages, Tips for avoiding paper jams – Dell 1125 Mono Laser MFP User Manual
Page 6

3.
Replace the toner cartridge and close the front cover.
Printing automatically resumes.
Tips for Avoiding Paper Jams
l
Follow the procedures in
Loading Print Media in the Paper Tray
. Ensure that the adjustable guides are correctly positioned.
l
Do not overload the paper tray. Ensure that the paper is below the paper capacity mark on the inside wall of the paper tray.
l
Do not remove the paper from the tray while your printer is printing.
l
Flex, fan, and straighten the paper before loading.
l
Do not use creased, damp, or curled paper.
l
Do not mix paper types in the paper tray.
l
Use only recommended print media. See
Recommended Paper
.
l
Ensure that the recommended print side of print media is facing down in the paper tray and facing up in the bypass tray.
l
Ensure that the duplex unit is installed correctly.
Clearing LCD Error Messages
The following table lists error messages that the LCD may display.
NOTE:
The Status Monitor displays the same errors but in a different format, though the cause and solution are identical. See
Using the Dell MFP 1125
Status Monitor
for more information.
Display
Likely cause
Suggested solutions
Tray error
Reinsert Input
tray
Paper tray not installed.
Install paper tray.
Engine Comms Error
Printer engine may be damaged or connection
faulty.
Restart printer. If message reappears, call Dell.
No Paper
Add Paper
No paper in trays.
Insert paper. (see
Loading Print Media in the Paper Tray
)
Paper Jam
Fuse Area
Paper jam in fuser area.
Remove jam (see
).
Paper Jam
Drum Area
Paper jam in drum area.
Remove jam (see
).
Paper Jam
Feeder Area
Paper jam in feeder area.
Remove jam (see
Toner Low
Toner 75% depleted.
Toner almost empty. Prepare replacement toner.
Toner Empty
Toner 95% depleted.
Replace toner (see
Replacing the Toner Cartridge
).
Invalid Toner/ No
Toner Found
Incorrect or empty toner installed.
Install new Dell™ genuine toner cartridge(see
Replacing the Toner Cartridge
).
Drum Life Exceeded
The drum life is depleted.
Replace drum cartridge(see
Replacing the Drum Cartridge
).