Dell OptiPlex 7020 (Mid 2014) - Manual (Page 42)

Option Description
• Enable Intel Virtualization Technology for Direct I/O - This option is
enabled by default.
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM)
can utilize the additional hardware capabilities provided by Intel Trusted
Execution technology. The TPM virtualization technology, and
Virtualization technology for direct I/O must be enabled to use this feature.
• Trusted Execution - This option is disabled by default.
Table 10. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default.
Some graphics cards require that the SERR message mechanism be
disabled.
Table 11. Cloud Desktop
Option Description
Server Lookup Method Specifies how the Cloud Desktop software will looks up the server
addresses.
• Static IP
• DNS - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Server Name Specifies server name of the server.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Server IP Address Specifies the primary static IP address of the Cloud Desktop server with
which the client software communicates. The default IP address is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop .
Server Port Specifies the primary IP port of the Cloud Desktop, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Client Address Method Specifies how the client obtains the IP address.
• Static IP
• DHCP - This option is enabled by default.
42