Dell OptiPlex 7020 (Mid 2014) - Manual (Page 40)

Option Description
• Disabled - Does not allow the TurboBoost driver to increase the
performance state of the processor above the standard performance.
• Enabled - Allows the Intel TurboBoost driver to increase the
performance of the CPU or graphics processor.
Rapid Start Technology Allows you to improve batter life by automatically putting the system into a
low power status during after user specified amount of time.
• Intel Rapid Start feature
NOTE: Rapid Start Technology will automatically be disabled due to
configuration changes:
• Hard Disk Configuration or partition have been changed
• System or HDD password is enabled
• A Dell Encryption Accelerator is installed
• The Block Sleep setting is enabled
Table 7. Power Management
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after
an AC power loss. You can set the AC Recovery to:
• Power Off - This option is enabled by default.
• Power On
• Last Power State
Auto On Time This option sets the time of the day when you would like the system to
turn on automatically. Time is kept in standard 12-hour format
(hour:minutes:seconds). The startup time can be changed by typing the
values in the time and A.M./P.M. fields.
• Disabled - The system will not automatically power up. This option is
selected by default.
• Every Day - The system will power up every day at the time you
specified above .
• Weekdays - The system will power up Monday through Friday at the
time you specified above.
• Select Days - The system will power up on days selected above at the
time you specified above.
NOTE: This feature does not work if you turn off your computer using
the switch on a power strip or surge protector or if Auto Power is set
to disabled.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5
This option is disabled by default.
Fan Control Override Controls the speed of the system fan. This option is disabled by default.
NOTE: When enabled, the fan runs at full speed.
40