Dell OptiPlex XE (Early 2010) - Manual (Page 22)

Back to Contents Page
Back Plate
Dell™ OptiPlex™ XE Service Manual— Desktop
Removing the Back Plate
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the expansion card(s) .
3. Lift and remove the back plate from the chassis.
Replacing the Back Plate
To replace the back plate, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.