Casio XJ-A241/XJ-A246* - Manual (Page 22)

22
To start a countdown timer operation
1.
Press the [TIMER] key to display the timer function menu.
z If necessary, use the procedure under “To specify timer display position and countdown time
settings” (page 21) to configure timer display position and start time settings.
2.
Use the [
T] and [S] keys to select “Start Timer” and then press the [ENTER] key.
z This will close the timer function menu and start the countdown.
z The timer will be displayed at this time. If the timer function menu “Continuous Display” item is
“Off”, the timer will disappear after about five seconds. If “On”, the timer will remain displayed.
To re-display the timer after it has disappeared, press [TIMER].
z After the countdown reaches 00:00, it will start a count up operation (from –00:01 to –60:00).
The numerals of the timer display are red during a count up operation.
Note
z If the timer is not displayed, it will appear automatically for about five seconds when the
countdown time reaches 3, 2, 1, and 0 minutes. If the timer function menu “Continuous
Display” item is “Off”, the timer will disappear after about five seconds. If “On”, the timer will
remain displayed.
z Turning off the projector, performing the “Restore All Defaults” (page 42) operation, or
performing the “Restore Menu Defaults” (page 41) operation on the Option Settings 2 main
menu while a timer countdown operation is in progress will stop the countdown and return the
countdown start time to the “Start Time” setting. Any other projector operations do not have
any affect on the timer.
To pause the timer countdown
1.
While a timer countdown is in progress, press the [TIMER] key to display the
timer function menu.
2.
Make sure that “Pause Timer” is selected and then press the [ENTER] key.
z This will pause the countdown and cause the timer function menu to disappear.
To restart a paused timer countdown
1.
While the timer countdown is paused, press the [TIMER] key to display the timer
function menu.
2.
Make sure that “Restart Timer” is selected and then press the [ENTER] key.
z This will restart the countdown and cause the timer function menu to disappear.
To reset the timer to its start time
1.
Press the [TIMER] key to display the timer function menu.
2.
Use the [
T] key to select “Reset Timer” and then press the [ENTER] key.
z This will return the timer to the start time specified by “Start Time” and cause the timer
function menu to disappear.
B