Replacing the display camera, Removing the display inverter cable – Dell Vostro 1088 (Mid 2009) User Manual
Page 34

11.
Remove the two screws that secure the display camera to the display assembly.
12.
Lift the display camera from the display assembly.
13.
Remove the two screws that secure the bracket to the display camera.
Replacing the Display Camera
Perform the steps described above in reverse order to replace the display camera into its bracket, and from there to the display assembly.
Removing the Display Inverter Cable
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
hard drive
from the computer.
5.
Remove the
WLAN card
from the computer.
6.
Remove the
control panel cover
from the computer.
7.
Remove the
keyboard
from the computer.
8.
from the computer.
9.
10.
11.
Remove the two screws that secure the display camera to the display LED panel.