Dell OptiPlex 320 - Manual (Page 10)

10
Quick Reference Guide
5 Connect power cables to the computer, monitor, and devices and connect the other ends of the power
cables to electrical outlets.
Power Connections
NOTICE:
To avoid damaging a computer with a manual voltage-selection switch, set the switch for the voltage that
most closely matches the AC power available in your location.
NOTICE:
In Japan, the voltage selection switch must be set to the 115-V position even though the AC power
available in Japan is 100 V.
6 Verify that the voltage selection switch is set correctly for your location.
Your computer has a manual voltage-selection switch. Computers with a voltage selection switch on
the back panel must be manually set to operate at the correct operating voltage.
book.book Page 10 Tuesday, October 17, 2006 11:16 AM