Keyboard, Removing the keyboard – Dell Inspiron M501R (Early 2010) User Manual
Page 28
Back to Contents Page
Keyboard
Dell™ Inspiron™ N5010/M5010 Service Manual
Removing the Keyboard
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the base cover (see
Removing the Base Cover
).
4.
Remove the screw that secures the keyboard to the computer base.
5.
Turn the computer over and open the display as far as possible.
6.
Press the keyboard and slide it towards the bottom as far as possible.
7.
Slide a plastic scribe between the keyboard and palm rest, and pry and lift the keyboard to disengage it from the tabs on the palm rest.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
NOTE:
The screw that secures the keyboard to the computer base may not be present in all computers.
CAUTION:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.