2 installing rapid nfs (rdnfs), 1 prerequisites, 2 steps for installing rapid nfs – Dell PowerVault DR6000 User Manual
Page 12: Installing rapid nfs (rdnfs), Prerequisites, Steps for installing rapid nfs, 2installing rapid nfs (rdnfs)
12
Installing Dell DR6000 Rapid CIFS and Rapid NFS on Windows and Linux Client Machines | January 2014
2
Installing Rapid NFS (RDNFS)
2.1
Prerequisites
• The client OS must be the 64-bit version of CentOS or SUSE.
• Only DR6000 supports Rapid NFS (RDNFS).
• The FUSE module should already be installed, as follows:
On NFS client machine, run the command below and verify the command output:
# rpm -qa | grep fuse
fuse-2.8.3-4.el6.x86_64
gvfs-fuse-1.4.3-15.el6.x86_64
fuse-libs-2.8.3-4.el6.x86_64
2.2
Steps for installing Rapid NFS
1. Download the installation package to the client box using the following steps:
a. On a Windows machine, launch the DR Series system GUI management interface through a
web browser.
b. Log in and click Storage-> Clients -> any client tab (NFS/CIFS/RDA) -> Download Plug-In.
c. Choose Rapid NFS [CentOS|SUSE] to download the accelerator package to your local
computer.
d. Use WinSCP or similar utility to copy the package to the NFS client machine.