Dell Mobile Projector M115HD - Manual (Page 26)

Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that
can be displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter
the Main Menu.
• To select an option, press the
or buttons on your projector’s control
panel or remote control.
• Use the or buttons on the control panel or remote control to adjust
the settings.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
A UTO S OURCE — If you select and
press to activate, the Auto Source
option will automatically find the
next available input source.
VGA— Press to detect a VGA
signal.
D O USB— Allows you to display the
computer/laptop screen to your
projector via the USB cable.
NOTE: If the DoUSB can not display, please see "Troubleshooting" on
page 50.
HDMI— Press to detect a HDMI signal.
USB— Allows you to playback the photo, music, or video files from your
USB flash disk. See "Multimedia Introduction" on page 39.
M ICRO SD— Allows you to playback the photo, music, or video files from
your micro SD card. See "Multimedia Introduction" on page 39.
I NTERNAL M EMORY — Allows you to playback the photo, music, or video
files from internal memory of the projector. See "Multimedia Introduction"
on page 39.
Using Your Projector 26