Dell XPS 14 (L421X, Mid 2012) - Manual (Page 18)

Replacing the System Badge
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Slide the tapes on the system badge into the slots on the base-cover assembly.
2 Slide the tabs on the system badge into the slots on the base-cover assembly and
snap the system badge into place.
3 Turn the base-cover assembly over.
4 Peel the stickers from the tapes and adhere the tapes to secure the system badge to
the base-cover assembly.
Postrequisites
1 Follow the instructions from step 2 to step 6 in "Removing the Base Cover" on
page 12.
18 | Replacing the System Badge