Dell OptiPlex 3010 (Mid 2012) - Manual (Page 33)

Action Keystroke
Exit BIOS — Remain in Setup, Save/Exit, Discard/Exit
Change a setting Left or right-arrow key
Select field to change
Cancel modification
Reset defaults or Load Defaults menu option
System Setup Options
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Table 1. General
Option Description
System Information Displays the following information:
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory
Speed, Memory Channels Mode, Memory Technology, DIMM 1 Size, DIMM 2
Size, DIMM 3 Size, and DIMM 4 Size.
• Processor Information: Displays Processor Type, Core Count, Processor ID,
Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology.
• PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4
• Device Information: Displays SATA-0, SATA-1, SATA-2, SATA-3, and LOM MAC
Address.
Boot Sequence Allows you to specify the order in which the computer attempts to find an operating
system from the devices specified in this list.
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
Date/Time Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
Table 2. System Configuration
Option Description
Integrated NIC Allows you to enable or disable the integrated network card. You can set the integrated
NIC to:
• Disabled
• Enabled (default)
• Enabled w/PXE
• Enabled w/ImageServer
33