Dell Latitude E6530 (Mid 2012) - Manual (Page 5)

5 Dell ControlVault
1 Dell ControlVault Update Overview
The ControlVault update package provides a single source to update the ControlVault driver and firmware.
The ControlVault update package consists of two components:
• The ControlVault Windows Driver
• The ControlVault Firmware
This white paper provides information on why the ControlVault update is required, and the instructions to
run the installation and perform the required integrity checks.
Before using the ControlVault update installer, you need to be aware that any previously enrolled
fingerprints with a prior version of Dell Data Protection | Security Tools will need to be re- enrolled after
the update completes. Make sure you can login to Windows using your password or recovery questions
before you proceed.
Note: If you are planning the use of the Dell Data Protection | Access or Wave Systems' EMBASSY Trust
Suite (ETS) security products, do not apply this software update.
1.1 Supported Operating Systems
The ControlVault software is supported on the following Microsoft Windows operating system:
• Microsoft Windows 7
• Microsoft Windows 8
• Microsoft Windows 8.1
1.2 Supported Dell Systems
Note: ControlVault requires specific hardware installed on the motherboard to run. You can order
ControlVault only during point of sale of the system.
ControlVault is supported on the following Dell systems:
• Dell Latitude E6230
• Dell Latitude E6330
• Dell Latitude E6430s
• Dell Latitude E6430
• Dell Latitude E6430ATG
• Dell Latitude E6530
• Dell Latitude E6440
• Dell Latitude E6440 ATG
• Dell Latitude E6540
• Dell Latitude E7240
• Dell Latitude E7440
• Dell Precision M4700
• Dell Precision M6700
• Dell Precision M4800
• Dell Precision M6800